CPU |
LGA1700 socket: Support for the 14th, 13th, and 12th Generation Intel® Core™, Pentium® Gold, and Celeron® Processors |
|
L3 cache varies with CPU |
|
(Refer to “CPU Support List” for more information) |
Chipset |
Intel® Z790 Express Chipset |
Memory |
– Support for DDR5 8266(O.C) / 8200(O.C) / 8000(O.C) / … / 4000 MT/s memory modules |
|
– 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory |
|
– Dual-channel memory architecture |
|
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
|
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
– Support for Extreme Memory Profile (XMP) memory modules |
|
(Refer to “Memory Support List” for more information) |
Onboard Graphics |
– Integrated Graphics Processor-Intel® HD Graphics support |
|
– 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz |
|
– Support for DisplayPort 1.2 version and HDCP 2.3 |
Audio |
– Realtek® ALC1220-VB CODEC |
|
– ESS ES9118 DAC chip |
|
– Support for DTS:X® Ultra |
|
– High Definition Audio |
|
– 2/4/5.1-channel |
|
– The front panel line-out jack supports DSD audio |
|
– You can change the functionality of an audio jack using the audio software. To configure 5.1-channel audio, access the audio software for audio settings. |
|
– Support for S/PDIF Out |
LAN |
– Marvell® AQtion AQC113C 10GbE LAN chip (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) |
Wireless Communication |
– Qualcomm® Wi-Fi 7 QCNCM865 (PCB rev. 1.0) |
|
– 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands |
|
– BLUETOOTH 5.3 |
|
– Support for 11be 320MHz wireless standard |
|
– MediaTek Wi-Fi 7 MT7927, RZ738 (PCB rev. 1.1) |
|
– 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands |
|
– BLUETOOTH 5.3 |
|
– Support for 11be 320MHz wireless standard |
|
– Intel® Wi-Fi 7 BE200 (PCB rev. 1.2) |
|
– 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands |
|
– BLUETOOTH 5.3 |
|
– Support for 11be 320MHz wireless standard |
|
(Actual data rate may vary depending on environment and equipment.) |
|
– Wi-Fi 7 features require Windows 11 SV3 to function properly. (There is no support driver for Windows 10) |
|
– Wi-Fi 7 channels on 6GHz band availability depends on individual country’s regulations. |
Expansion Slots |
– CPU: 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) |
|
– The PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot operates at up to x8 mode when a device is installed in the M2C_CPU connector. |
|
– For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
|
– Chipset: 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4) |
|
– 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1) |
Storage Interface |
– CPU: 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU) |
|
– 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
|
– Chipset: 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB) |
|
– 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support)(M2P_SB) |
|
– 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) |
|
– 4 x SATA 6Gb/s connectors |
|
– RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage devices |
|
– RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices |
USB |
– Chipset: 3 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (2 ports on the back panel, 1 port available through the internal USB header) |
|
– Chipset+2 USB 3.2 Gen 2 Hubs: |
|
– 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support |
|
– 7 x USB 3.2 Gen 2 Type-A ports (red) on the back panel |
|
– Chipset+2 USB 3.2 Gen 1 Hubs: |
|
– 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
|
– Chipset+USB 2.0 Hub: |
|
– 4 x USB 2.0/1.1 ports available through the internal USB headers |
Internal I/O Connectors |
– 1 x 24-pin ATX main power connector |
|
– 2 x 8-pin ATX 12V power connectors |
|
– 1 x CPU fan header |
|
– 1 x CPU fan/water cooling pump header |
|
– 4 x system fan headers |
|
– 4 x system fan/water cooling pump headers |
|
– 3 x addressable RGB Gen2 LED strip headers |
|
– 1 x RGB LED strip header |
|
– 5 x M.2 Socket 3 connectors |
|
– 4 x SATA 6Gb/s connectors |
|
– 1 x front panel header |
|
– 1 x front panel audio header |
|
– 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support |
|
– 2 x USB 3.2 Gen 1 headers |
|
– 2 x USB 2.0/1.1 headers |
|
– 1 x noise detection header |
|
– 2 x Thunderbolt™ add-in card connectors |
|
– 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only) |
|
– 1 x power button |
|
– 1 x reset button |
|
– 1 x reset jumper |
|
– 1 x Clear CMOS jumper |
|
– 2 x temperature sensor headers |
|
– Voltage Measurement Points |
Back Panel Connectors |
– 1 x Q-Flash Plus button |
|
– 1 x Clear CMOS button |
|
– 2 x SMA antenna connectors (2T2R) |
|
– 1 x DisplayPort |
|
– 1 x USB Type-C® port, with USB 3.2 Gen 1 support |
|
– 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support |
|
– 7 x USB 3.2 Gen 2 Type-A ports (red) |
|
– 4 x USB 3.2 Gen 1 ports |
|
– 1 x RJ-45 port |
|
– 1 x optical S/PDIF Out connector |
|
– 2 x audio jacks |
I/O Controller |
iTE® I/O Controller Chip |
H/W Monitoring |
– Voltage detection |
|
– Temperature detection |
|
– Fan speed detection |
|
– Water cooling flow rate detection |
|
– Fan fail warning |
|
– Fan speed control |
|
(Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.) |
|
– Noise detection |
BIOS |
– 1 x 256 Mbit flash |
|
– Use of licensed AMI UEFI BIOS |
|
– PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique Features |
– Support for GIGABYTE Control Center (GCC) |
|
(Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.) |
– Support for Q-Flash |
|
– Support for Q-Flash Plus |
|
– Support for Smart Backup |
|
Bundled Software |
– Norton® Internet Security (OEM version) |
– LAN bandwidth management software |
|
Operating System |
– Support for Windows 11 64-bit |
Form Factor |
– E-ATX Form Factor; 30.5cm x 26.0cm |
There are no reviews yet.